Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Echo Park, CA
Chimney repair in Echo Park usually means evaluating whether a 1910s or 1930s brick flue is safe to use. Most of the homes here were built before modern chimney liners existed, so our work centers on cracked clay tiles, missing caps, and masonry that hasn’t been inspected in years. Fireside Chimney Sweep handles that full scope: sweeping, structural repair, HeatShield resurfacing, and dryer vent cleaning. Call (844) 963-3205. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Echo Park Homes Are Different
Echo Park’s housing stock is dominated by 1910s – 1930s California bungalows and Craftsman-style homes built around the original Angelino Heights and Lake Shore area. Many still have their original brick fireplaces and masonry chimneys that were never lined to modern standards. Unlike the newer San Fernando Valley suburbs, where a chimney sweep mostly services factory-built inserts, here the job is almost always assessing whether a 100-year-old unlined brick flue is safe to use at all.
The terrain adds another layer. Homes sit on hillside lots with steep, narrow stairs and tight side-yard access. Hauling equipment and reaching roof lines takes longer here than on flat streets. The mild, dry climate means fireplaces see light, occasional use on cool winter evenings, not heavy heating loads. Creosote buildup is slow, but long dormant periods let nests, debris, and seismic cracks go unnoticed until someone tries to light a fire and gets smoke rolling back into the living room.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Echo Park Services
Echo Park homeowners call us most often about two things: getting an older fireplace swept and inspected before burning season, and clearing dryer vents that haven’t been touched since the house was bought. Both are handled by the same team, with the same repair-trained eye.
Chimney Sweep in Echo Park
A Chimney Sweep in Echo Park here starts with an inspection of the flue, cap, crown, and firebox. We’re looking for cracked clay tiles, unlined brick, bird nests, and the creosote that builds up from resinous softwood and manufactured logs. In these older homes, the sweep is rarely just routine. After cleaning, we give you a photo report of what we saw, and if masonry work is needed, we can scope it the same visit. That single-visit diagnosis saves you having to book a second company and wait for a referral.

Dryer Vent Cleaning in Echo Park
Dryer vents in older Echo Park homes often run through tight crawl spaces or out short side walls that collect lint fast. We clean the full run from the dryer to the exterior termination, remove compacted lint, and confirm the flap opens properly. Dryer Vent Cleaning in Echo Park matters in these pre-war homes because vents were often installed decades ago and never sized or routed for modern dryers. Restricted airflow means longer dry cycles and a real fire risk. We clear it with the same care we give a chimney.

Chimney Repair in Echo Park
Most Chimney Repair calls in Echo Park begin with a question: is this old flue safe to burn at all? The homes here are pre-war bungalows and Craftsman cottages, many with original unlined brick or cracked clay tile liners that have survived earthquakes and decades of occasional use. The surrounding dry hillsides and Santa Ana wind events make a damaged cap or missing spark arrestor more than a nuisance. It’s a wildfire-ember risk. We inspect first, show you photos, and repair only what the camera proves needs work.
Chimney Cap Installation
Signs you need it
You hear birds or raccoons in the flue, see rain streaking the firebox, or notice the old cap is crushed or gone entirely.
What it costs in Echo Park
Chimney cap installation in Echo Park typically runs $150 to $400 depending on flue size and roof access.
How we do it
We measure the flue opening, choose a stainless cap from Famco or Copperfield, and secure it with mechanical fasteners rated for the local wind conditions.
Chimney Liner Installation
Signs you need it
Your flue has cracked or missing clay tiles, no liner at all, or smoke stains bleeding through interior walls near the chimney.
What it costs in Echo Park
Chimney liner installation in Echo Park typically runs $2,500 to $5,500 for a DuraFlex flexible liner system, depending on flue height and access.
How we do it
We size the flue, run a DuraFlex liner down from the crown, insulate where required, and reconnect the appliance with a proper connector.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, rusted flashing, or damp drywall after rain.
What it costs in Echo Park
Chimney flashing repair in Echo Park typically runs $350 to $900, though steep hillside roofs push the labor higher.
How we do it
We remove the old flashing, install Copperfield step and counter flashing, and seal the junction so water can’t get behind the brick.
Chimney Crown Repair
Signs you need it
The concrete crown is cracked, spalling, or has visible gaps that let water soak into the masonry below.
What it costs in Echo Park
Chimney crown repair in Echo Park typically runs $400 to $1,000, and a full concrete CrownSaver cap can run higher if the old crown is badly deteriorated.
How we do it
We clean the surface, fill cracks with a repair mortar, and recoat with a waterproof crown sealer that handles the dry, hot summers.
What Chimney Repair Costs in Echo Park
| Item | Typical range in Echo Park |
|---|---|
| Chimney cap installation | $150 – $400 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $400 – $1,000 |
Can you repair a chimney without tearing down the brick?
Yes. HeatShield resurfacing can restore cracked or deteriorating flue tiles from the inside, often avoiding a full masonry rebuild. We apply the coating in layers to seal gaps and create a smooth, insulated flue surface. Call (844) 963-3205 and we’ll scope the flue and show you photos before recommending anything.
How do I know if my Echo Park chimney needs a new liner?
You don’t, until a camera goes down the flue. Cracked clay tiles, gaps between sections, and unlined brick are the common findings in 1910s and 1930s bungalows. We show you the video, explain the risk, and price a DuraFlex liner only if the flue genuinely needs it. Call (844) 963-3205 for a free estimate.
Brands We Service in Echo Park
We work with professional-grade components from DuraFlex, HeatShield, Copperfield, and Famco. Parts are stocked locally, so most chimney cap and flashing repairs don’t wait on a shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Echo Park, CA
| Service | Typical range in Echo Park |
|---|---|
| Chimney sweep and inspection | $180 – $340 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $200 – $450 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $400 – $1,000 |
In Echo Park, steep hillside access and tight side yards push labor costs up compared to flat-lot homes. We give you a written estimate before any work begins, so the price on paper is the price you pay.
Neighborhoods We Serve in Echo Park
We work throughout Echo Park, from the hills above the lake to the streets near Sunset. Response times vary with the hillside, but most calls in the 90026 area get a same-day booking when you call before early afternoon.
- Angelino Heights
- Elysian Heights
- Echo Park Lake area
- Lake Shore
- Victor Heights
Service Area – Cities Near Echo Park
Fireside Chimney Sweep also covers the neighborhoods and cities around Echo Park, including Silver Lake, CA, Westlake, CA, Chinatown, CA, and Historic Core, CA. If you’re just outside the immediate area, call and we’ll confirm the next available dispatch window.
Serving Echo Park, CA – Our Local Coverage Area
We serve Echo Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Echo Park
We answer the phone 24/7 and dispatch technicians Sunday through Friday, 7am to 7pm. Hillside streets and narrow access can add time once we’re on site, but most Echo Park calls get a same-day booking. Call (844) 963-3205 to check the next opening.
Los Angeles requires permits for structural changes like full chimney rebuilds, but routine repairs such as cap replacement, flashing work, and liner installation typically don’t need one. We’ll tell you if your job crosses that line, and the written estimate covers what’s needed.
Yes, and homeowners often bundle them. One team sweeps the chimney, inspects the flue, and clears the dryer vent in a single visit. It’s the fastest way to get the whole picture of your home’s venting safety. Call (844) 963-3205. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Echo Park Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Michael Novak"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Carlos Rodriguez"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Sharma